Your cart
There are no more items in your cart
COP®
COP® 9250N Molle Glove/Tourniquet Holder
219250N-MOL
(19)
13.99 €
[SSP2 12.99 €]
Info
Info
In order to receive the discounted SSP, you must register as a member of an authority.
Inkl. MwSt.
additional shipping cost
can be worn horizontally or vertically, 2 sizes available
Colour: Black
Material: Polypropylene synthetic fibre
Surface: woven structure
Weight: 45 g
COP® belt holder for gloves and other equipment (e.g. tourniquet) made of tear-resistant nylon with Molle loop system at the back. The two-loop system allows it to be stably attached to vests, backpacks and to bags that have a Molle loop system. This holder can also be attached to belts up to 58 mm wide.
The new version of the COP® 9250 glove holder can be worn horizontally or vertically as desired. To do this, simply pull the holder loop straight through the plastic D-ring and unthread it. Then thread the holder loop into the desired carrying position and pull it back through the plastic D-ring. Due to the special end of the loop, accidental unthreading is almost impossible.
The gloves are thus held in place by an adjustable loop and can be pulled up or down depending on the way they need to be worn.
Size 1 suitable for:
for tourniquet and thinner gloves when placed on top of each other in pairs and have a circumference of up to 20 cm at the wrist, e.g. COP®:320205TS, 320212TS, 320214TS, 320216TS, 320SGXNTS, 320PPGTS etc. Under Armour® UA1242663, UA1242620, UA1242621 etc., Hatch®: 35SGK100, 35PPG1, 35SGX11 and 35SOG600 etc., Mechanix Wear(TM) MW-CW-L, MW-HMG55010S, MW-HMG55, MW-MG55010S, SICH-1
Size 2 suitable for:
Bulkier gloves if they are placed on top of each other in pairs and have a circumference of more than 20 cm at the wrist, e.g. COP: 320201TS, 320205WTS, 320108TS. 320214WTS, 32F200TS, 320107TS, etc. Under Armour® UA1300833S, UA1300082S, UA1282766S etc., Hatch®: 35SP100N etc.
Item no.: 219250N-MOL / EAN: 4052236150260
Colour: Black
Material: Polypropylene synthetic fibre
Surface: woven structure
Weight: 45 g
COP® belt holder for gloves and other equipment (e.g. tourniquet) made of tear-resistant nylon with Molle loop system at the back. The two-loop system allows it to be stably attached to vests, backpacks and to bags that have a Molle loop system. This holder can also be attached to belts up to 58 mm wide.
The new version of the COP® 9250 glove holder can be worn horizontally or vertically as desired. To do this, simply pull the holder loop straight through the plastic D-ring and unthread it. Then thread the holder loop into the desired carrying position and pull it back through the plastic D-ring. Due to the special end of the loop, accidental unthreading is almost impossible.
The gloves are thus held in place by an adjustable loop and can be pulled up or down depending on the way they need to be worn.
Size 1 suitable for:
for tourniquet and thinner gloves when placed on top of each other in pairs and have a circumference of up to 20 cm at the wrist, e.g. COP®:320205TS, 320212TS, 320214TS, 320216TS, 320SGXNTS, 320PPGTS etc. Under Armour® UA1242663, UA1242620, UA1242621 etc., Hatch®: 35SGK100, 35PPG1, 35SGX11 and 35SOG600 etc., Mechanix Wear(TM) MW-CW-L, MW-HMG55010S, MW-HMG55, MW-MG55010S, SICH-1
Size 2 suitable for:
Bulkier gloves if they are placed on top of each other in pairs and have a circumference of more than 20 cm at the wrist, e.g. COP: 320201TS, 320205WTS, 320108TS. 320214WTS, 32F200TS, 320107TS, etc. Under Armour® UA1300833S, UA1300082S, UA1282766S etc., Hatch®: 35SP100N etc.
Item no.: 219250N-MOL / EAN: 4052236150260
- material
- Nylon/Cordura®
- Attachment
- Molle System
- Lock
- Velcro
- Holster for
- Glove
- Reference
- 219250N-MOL
- EAN
- 4052236150260
Accesories (9 Products)
Gloves with all-around cut protection
Hatch "Street Guard X11" glove
79.90 €
94.99 €
available
Art.: 35SGX11-L
Gloves with partial cut protection
Hatch "PPG2" Puncture Protective Gloves
104.99 €
[
SSP2 94.99 €]
available
Art.: 35PPG2-L
Gloves with all-around cut protection
COP® SGXN TS glove
74.99 €
[
SSP2 69.99 €]
available
Art.: 320SGXNTS-L
Gloves with all-around cut and needle protection
Duty glove COP® "PPG TS"
94.99 €
[
SSP2 84.99 €]
available
Art.: 320PPGTS-XXL
Gloves with all-around cut and needle protection
Duty glove COP® "NPG TS"
79.99 €
[
SSP2 74.99 €]
available
Art.: 320NPGTS-L
Gloves with partial cut protection
COP® LG1V2 Ladies Glove w/touchscreen function, black
49.90 €
74.99 €
available
Art.: 320LG1 V2-L
Reviews for COP® 9250N Molle Glove/Tourniquet Holder
Do you have anymore questions?