Your cart
There are no more items in your cart
-
TIPP
-
COP® TAC Pant 2 , black84.99 € -
-
adidas GSG9.4 Tactical Boots169.99 € -
Duty glove COP® "PPG TS"89.99 € -
COP® 903 Equipment Bag (43 liter)79.90 € 99.99 € -
-
-
-
-
COP Speras Flashlight - EST 2.0 - and Holder 140759.90 € 77.99 € -
-
-
-
MECHANIX WEAR®
Mechanix Wear® Pursuit Glove
MW-TSCR55-L
44.99 €
[SSP2 39.99 €]
All prices incl. VAT
additional shipping cost
Sizes: S - 2XL
Color: Black
Material:
Back: 96% polyester, 4% elastane
Upper material finger: 94.5% polyester, 5.5% elastane
Leather palm: 60% nylon, 40% polyurethane
Cushion: 100% polyester
Finger gap: 96% polyester, 4% elastane
Back print of thermoplastic rubber
Machine washable up to 30 ° C
The Mechanix Wear® Pursuit CR5 glove from the Tactical Line is an anatomically shaped all-round glove.
Compared to other models, only the palm of the hand and the palm of the fingers are designed to be cut-resistant, anatomically adjusted and covered with artificial leather, providing lasting gripping power in any conceivable application environment.
The ultimate cut protection lining made from ARMOR-TEX® in the area of ??the palm of the hand protects against cutting injuries. ARMOR-TEX® is lighter than comparable cutting-edge chucks in order to minimize as much as possible.
Thumb and pointing finger are touch screen compatible.
Thick, breathable inserts create pressure and heat deflection at the sides along the fingers.
The thumbar flexion, which is often heavily loaded, is also strengthened. The upper material is airy and at the same time very robust.
A TPR-coated hook and loop fastener provides secure fit to the wrist.
The elastic material on the back of the hand is breathable and provides for comfort and a more efficient moisture transport.
Hook and loop fastener strap at the waist. The special hook-and-loop protects the clothing, especially the sleeve cuff.
A reinforced loop has been incorporated at the wristband end of each glove to allow it to be attached to turnout gear or equipment by means of a carabiner or similar, but can also be used as a donning aid.
Testing according to EN388:2016:
Abrasion resistance: Category 3
Cutting resistance (COUP): Category X
Resistance to tearing: Category 4
Puncture resistance: Category 3
Cutting resistance: Category D
Testing according to EN420:2009+A1:2009 and EN388:2016 by SATRA Quality Assurance Ltd. on 14. May 2019
Color: Black
Material:
Back: 96% polyester, 4% elastane
Upper material finger: 94.5% polyester, 5.5% elastane
Leather palm: 60% nylon, 40% polyurethane
Cushion: 100% polyester
Finger gap: 96% polyester, 4% elastane
Back print of thermoplastic rubber
Machine washable up to 30 ° C
The Mechanix Wear® Pursuit CR5 glove from the Tactical Line is an anatomically shaped all-round glove.
Compared to other models, only the palm of the hand and the palm of the fingers are designed to be cut-resistant, anatomically adjusted and covered with artificial leather, providing lasting gripping power in any conceivable application environment.
The ultimate cut protection lining made from ARMOR-TEX® in the area of ??the palm of the hand protects against cutting injuries. ARMOR-TEX® is lighter than comparable cutting-edge chucks in order to minimize as much as possible.
Thumb and pointing finger are touch screen compatible.
Thick, breathable inserts create pressure and heat deflection at the sides along the fingers.
The thumbar flexion, which is often heavily loaded, is also strengthened. The upper material is airy and at the same time very robust.
A TPR-coated hook and loop fastener provides secure fit to the wrist.
The elastic material on the back of the hand is breathable and provides for comfort and a more efficient moisture transport.
Hook and loop fastener strap at the waist. The special hook-and-loop protects the clothing, especially the sleeve cuff.
A reinforced loop has been incorporated at the wristband end of each glove to allow it to be attached to turnout gear or equipment by means of a carabiner or similar, but can also be used as a donning aid.
Testing according to EN388:2016:
Abrasion resistance: Category 3
Cutting resistance (COUP): Category X
Resistance to tearing: Category 4
Puncture resistance: Category 3
Cutting resistance: Category D
Testing according to EN420:2009+A1:2009 and EN388:2016 by SATRA Quality Assurance Ltd. on 14. May 2019
- Schnittschutzkategorie EN388
- nach neuer Norm EN388:2016
- Cut protection
- Partial Cut Protect
- Abrasion resistance to EN388:2016
- category 3
- Cut resistance (COUP) to EN388:2016
- X
- Tear resistance to EN388:2016
- category 4
- Puncture resistance to EN388:2016
- category 3
- Cut resistance (TDM) to EN388:2016
- category D
- Reference
- MW-TSCR55-L
- EAN
- 0781513630624
Accesories
-
TIPP
1
1
Accessories
Hände-Desinfektionsmittel Sterillium® Virugard 100ml
4.49 €
= 44.90 € / 1.0Liter
SSP = 39.90 € / 1.0Liter
SSP = 39.90 € / 1.0Liter
available
Art.: HDG306610